-
![Carbon Graphite Products]()
Carbon graphite is one kind of non-metal material, it is widely used in all kinds of industres and applications. Carbon graphite material has good self-lubricated, good wear resistance and good...
Add to Inquiry -
![EDM Graphite]()
1) Lower density and lighter weight compared with cooper materials
2) Easier for the machining
3) Strong thermal shock resistance ability
4) Not easy to bend compared with...Add to Inquiry -
![High Density Graphite]()
Bending Strength: 20-50Mpa
Bulk Density: 1.70-1.9g/cc
Compressive Strength: 80-100Mpa
Place of Orgin: ChinaAdd to Inquiry -
![EK60 Similar Carbon Plate]()
This grade material is high pure graphite impregnated resin, normally density is about 1.8~1.89g/cc, max working temperature is about 200 Celsius degree, it has good self-lubricated. It can be...
Add to Inquiry -
![Antimony Carbon]()
These material are widely used for producing antimony carbon seal, bushing, bearing, thrust pad, assembling rings, sliding vanes in Mechanical Industry, Chemical Industry, Metallurgical Industry, etc.
Add to Inquiry -
![Babbit Carbon]()
It is mechanical carbon graphite material, mainly producing babbit carbon graphite seal, graphite bushing, graphite bearing, thrust pad, split rings, conductive vane in chemical industry, pump...
Add to Inquiry -
![Electrographite Carbon Brush Block]()
Electrographite Carbon Brush Block
Grades: D172, D174, D374, EG0 similar, SA45 similar, EG251 similar and so on
Applications: producing industry carbon brushes
Size: standard size is 105*125*33mm and so on, also,...Add to Inquiry -
![Silver Carbon Brush Block]()
Silver carbon is one kind of expensive carbon brush block material, it has good electrical conductivity. The silver content can be 10~90% according to the customers' requirements. In order to keep...
Add to Inquiry -
![Copper Carbon Brush Block]()
Grades: J201, J204, CM9 similar, RC53 similar, CM5H similar, RC73 similar, RC90 similar, B14Z1 similar and so on
Copper content: 20%~97% as normally
Produce: molded and bakedAdd to Inquiry -
![Carbon Graphite Brush]()
Grades: RC53/RC67/RC73/RC87/CM1S/B14Z1/NCC634/LFC554/EG251 similar, D172/D174/D374/J201/J204/S3/S6, silver carbon, 639/839 and so on
Applications: power tools, motor, generator, power...Add to Inquiry -
![Graphite Sinter Mold]()
Graphite sinter mold are normally produced by high pure graphite, high density graphite and isotatic graphite, it has high density, high working temperature and long life time. It is widely used...
Add to Inquiry -
![Graphite Melting Crucible]()
With 99.9% high-purity graphite and 1.8-1.9g/cm³ high density, our crucible is not easy to be doped with impurities during the smelting process and can be used to melting high-purity precious metals.
Add to Inquiry
Clarissa Gent
Bernard Crawford
Rosalba Trevino
Joe Ortega
Max Woolsey
Anna Kates
Our products include graphite and carbon rods and blocks, purified, granular, molded, baked and extruded graphite and carbon, plus graphite gouging rods, graphitization and toll carbon baking...
Feature of Special Graphite Products. The demand from industry over the years has been for carbon with increasingly tighter and stable properties. In this context, Toyo Tanso was the...
3624 Carbon and Graphite Products. Establishments primarily engaged in manufacturing carbon, graphite, and metal-graphite brushes and brush stock; carbon or graphite electrodes for thermal and...
CARBON-GRAPHITE PRODUCTS, Refractory Engineers (REI) offers a full line of carbon graphite products. From graphite felt, graphite board, and foil insulation to graphite setter plates, graphite...
We offer carbon/graphite products for different applications. Carbon Bush Bearings (journal bearings): Carbon bush bearings are required for use in canned motor pumps, magnetic drive pumps,...
CARBON AND GRAPHITE PRODUCTS FOR CHEMICAL RESISTANT LINING GRAPHITE COVA GMBH STANDARD BRICKS SHAPES GRAPHITE COVA GMBH GRÜNTHAL 1 – 6 D-90552 RÖTHENBACH/PEGNITZ Tel.: +49 911 57 08 – 0 · Fax: +49...
