Structural description of rotary vane vacuum pump
Dec 27, 2022
The rotary vane vacuum pump is a positive displacement pump, which uses the rotary vane to continuously operate in the pump chamber to suck and compress the gas, and finally discharge it through the exhaust port. The pump is mainly composed of a stator, a rotor, a rotary vane, etc., and the rotor is eccentrically loaded into the stator cavity. There are two rotary vanes in the rotor groove, and the rotary vane spring is placed between the two rotary vanes. The intake and exhaust ports on the stator are separated into two parts by the rotor and the rotary vane.
When the rotor rotates in the stator cavity, the end of the rotary vane slides against the inner wall of the pump cavity under the combined action of the spring tension and its own centrifugal force, and periodically expands the cavity volume on the side of the air inlet to inhale gas, and at the same time The volume of the exhaust port is gradually reduced, the inhaled gas is compressed, and then discharged from the exhaust port to achieve the purpose of pumping.






